Descriptions of functions
10.3 Communication according to PROFIdrive
SINAMICS DCM DC Converter
430 Operating Instructions, 12/2018, A5E34763375A
Encoder 1 actual position value 2 (G1_XIST2)
Different values are entered in Gx_XIST2 depending on the function.
● Priorities for Gx_XIST2
The following priorities should be considered for values in Gx_XIST2:
Figure 10-7 Priorities for functions and Gx_XIST2
● Resolution: Encoder pulses ∙ 2n
n: Fine resolution, no. of bits for internal multiplication
Figure 10-8 Subdivision and settings for Gx_XIST2
To Next Page
Loading...
