Siemens SINAMICS GL150 - Visual Inspection

2.2 Visual inspection
The visual inspection is performed to ensure that the equipment complies with the order
specifications. The tests are carried out with the drive in a no-voltage condition.
The visual inspection together with the customer – or with the company accepting the
equipment – is carried out with the drive installed and labeled. Each test step is documented in
the acceptance report with the specific results of the step.
The visual inspection is part of the function test (F72, F73).
Visual inspection Order codes
Without the
customer
present
With the cus‐
tomer
present
● Rating plate
● Housing degree of protection
● Electrical cabinet components
● Cable installation
● Cable markings
● Setting values of circuit breakers, if used
● Dimensions
- F03
See also
Visual inspection (Page 18)
General scope of services
2.2 Visual inspection
SINAMICS GL150 6SL3855 F03 F70 F76 F79 F98 E11
12 Reference Manual Rev.201902141423 GL150 wassergekühlt