Siemens SINAMICS S110 - Safety instructions for electromagnetic fields (EMF); Handling electrostatic sensitive devices (ESD)

Creating the drive project ONLINE
3.4 Transferring the configuration
Getting Started
Function Manual, 10/2008, 6SL3097-4AG10-0BP0
21
Figure 3-9 Comparing the configuration: Identical
If no discrepancies are displayed, the configuration is synchronized.
3. Close the comparison window.
4. STARTER shows the Control_Unit and Drive_1 data that has been loaded in the project
window under Configuration. Commissioning is now complete.
Figure 3-10 Full configuration