Creating the drive project ONLINE
3.3 Creating projects ONLINE
Getting Started
16 Function Manual, 10/2008, 6SL3097-4AG10-0BP0
3.3 Creating projects ONLINE
When you call up STARTER, the project Wizard is also called up by default. If an online help
window is also displayed, you can close this as it is not needed. If the project Wizard is not
called up, choose New with Wizard in the "Project" menu.
1. Choose Find drive units online... to create a new project with the STARTER project
Wizard.
Figure 3-1 Project Wizard: introduction
2. The project Wizard continues to 1. Create a new project. Enter a name for the project
(e.g. Project_1) and, if necessary, enter the author and any comments.
Figure 3-2 Project Wizard: entering project data
In Storage location, you can specify a storage path for the project.
Choose Continue >.
To Next Page
Loading...
