Siemens SINAMICS S120 - Data Backup in a STEP 7 Project

Requirements
Data Backup of SINAMICS S120
SINAMICS S120 at Technology CPU Entry ID: 21767896
V1.0 Edition 10/28/05 29/58
Copyright © Siemens AG 2005 All rights reserved
SINAMICS S120 und Technologie-CPU V2.0-SP1__05-10-28_13-20_e.doc
Figure 4-4 Permanent storing of the loaded data – Copy RAM to ROM
4.3.2 Data backup in a STEP 7 project
All parameters and BICO interconnections can also be backed up and
archived in a STEP 7 project. This requires that the data are loaded from
SINAMICS S120 to the STEP 7 project.
Backing up the data
To back up the data, proceed as follows:
Table 4-3 Backup of the drive data
No. Instruction Note
1.
In the Project menu, establish the
online connection to SINAMICS
S120 by selecting the menu item
Connect to target system.