Siemens SINUMERIK 802C - Completing the Start-Up

01.02 1 Alarms
© Siemens AG 2002 All Rights Reserved 6FC5598-3AA20-0BP2
SINUMERIK 802S/802C (DG) 1-87
Alarm display.
Interface signals are set.
Repeat your entry with the correct value and Power On.
Power ON
Axis %1 machine data %2 [%3] invalid value
%1 = Axis name, spindle number
%2 = String: MD identifier
%3 = Index: MD array index
MD contains an invalid value.
Mode group ('BAG') not ready for operation.
Channel not ready for operation.
NC Start inhibited.
NC Stop at alarm.
The NC changes to follow-up mode.
Alarm display.
Interface signals are set.
Repeat your entry with the correct value and Power On.
Power ON
Remedy
Program continua-
tion by
26 015
Explanation
Response
Remedy
Program continua-
tion by