Siemens SINUMERIK 808D

808D Page 97 Operating and Programming — Milling
ISO
Mode
s
Content
Basic Theory
Unit Description
This unit describes the ISO operating functions in 808D, compares the
similarities and differences of the machining code in DIN mode and ISO
mode and shows how to transfer and implement the ISO machining pro-
gram.
Unit Content
ISO
function
switch
ISO
code
explanation
ISO program
transfer and
operation
ISO
function
switch
Siemens standard machining codes are implemented in
DIN mode. The 808D also provides also provides appro-
priate functions for implementing the ISO commands,
but the ISO mode must be activated during operation.
ISO function switch
Press the “Shift” + “System - Alarm” keys
on the PPU. Input the manufacturer’s
password (“SUNRISE”)
Method 1
Press the “ISO mode” SK on the right.
A dialog box appears prompting whether
to activate the new setting. Select the
“OK” SK to activate it.
+
End