Siemens SINUMERIK 810D Diagnostic Manual

PLC alarms
11/2006 Overview of Alarms
2-825
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
410900 M:N: call waiting was not continued
Definitions: The switchover sequence started was not completed
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410901 M:N: HMI 1 does not respond to displacement
Definitions: The HMI that is to be switched over does not respond
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410902 M:N: HMI 1 does not go offline
Definitions: The HMI that is to be switched over does not respond
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410903 M:N: HMI 2 does not respond to displacement
Definitions: The HMI that is to be switched over does not respond
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410904 M:N: HMI 2 does not go offlin
Definitions: The HMI that is to be switched over does not respond
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410905 M:N: No HMI link to assigned interface
Definitions: The HMI to be switched over is not connecting to the NC
Reaction: Alarm display.
Remedy: Reactuate channel menu on HMI
Program
Continuation:
Internal
410906 M:N: No sign of life of an HMI
Definitions: Link to NC disconnected
Reaction: Alarm display.
Remedy: Check connection to HMI
Program
Continuation:
Internal

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English