Siemens SINUMERIK 828D Connection Instructions

2018/9/17 Version: V1.4 Joseph.Sun
Notice
The OPC UA components can be installed on PCU, NCU and PPU target
systems.
The following steps are necessary to do this:
1. Setting the license
2. Executing the OPC UA configuration dialog
3. Checking the HMI time
4. Performing a restart
 In SIEMENS V4.05, there is no user account /password and does not
need to select signature & encryption. The access right of OPC/UA
application program (Client) is rights of local machine operator.
 In SIEMENS V4.07, the user needs to use the user account /password
and there is no signature & encryption selection in the user interface.
The access right of OPC/UA application program (Client) is rights of
login account.
The user account/password is not allowed to remodify after setting
the login user account / password. Users can adopt the 3
rd
party
OPC/UA client software program to modify the user
account/password again.

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash