Siemens Sinumerik 840 sl

Expanding the Operator Interface (BE1) 08/2005
8 Terms, Tables, Lists, Examples
© Siemens AG, 2005. All rights reserved
BE1/8-192 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Name Index Description
$SC_PA_ORI[x] x=Number
protection zone
Plane assignment of protection zone
$SC_PA_PLUS_LIM
[x]
x=Number
protection zone
Upper limit of protection zone, applicate
$SC_PA_T_W[x] x=Number
protection zone
Workpiece or tool-related protection zone
$SN_PA_ACTIV_
IMMED[x]
x=Number
protection zone
Immediately active after referencing
$SN_PA_CENT_ABS
[x,0]
x=Number
protection zone
Abscissa of arc center of 1st contour element
$SN_PA_CENT_ABS
[x,1]
x=Number
protection zone
Abscissa of arc center of 2nd contour element
$SN_PA_CENT_ABS
[x,2]
x=Number
protection zone
Abscissa of arc center of 3rd contour element
$SN_PA_CENT_ABS
[x,3]
x=Number
protection zone
Abscissa of arc center of 4th contour element
$SN_PA_CENT_ABS
[x,4]
x=Number
protection zone
Abscissa of arc center of 5th contour element
$SN_PA_CENT_ABS
[x,5]
x=Number
protection zone
Abscissa of arc center of 6
th
contour element
$SN_PA_CENT_ABS
[x,6]
x=Number
protection zone
Abscissa of arc center of 7
th
contour element
$SN_PA_CENT_ABS
[x,7]
x=Number
protection zone
Abscissa of arc center of 8
th
contour element
$SN_PA_CENT_ABS
[x,8]
x=Number
protection zone
Abscissa of arc center of 9
th
contour element
$SN_PA_CENT_ABS
[x,9]
x=Number
protection zone
Abscissa of arc center of 10
th
contour element
$SN_PA_CENT_ORD
[x,0]
x=Number
protection zone
Ordinate of arc center of 1st contour element
$SN_PA_CENT_ORD
[x,1]
x=Number
protection zone
Ordinate of arc center of 2nd contour element
$SN_PA_CENT_ORD
[x,2]
x=Number
protection zone
Ordinate of arc center of 3rd contour element
$SN_PA_CENT_ORD
[x,3]
x=Number
protection zone
Ordinate of arc center of 4th contour element
$SN_PA_CENT_ORD
[x,4]
x=Number
protection zone
Ordinate of arc center of 5th contour element
$SN_PA_CENT_ORD
[x,5]
x=Number
protection zone
Ordinate of arc center of 6
th
contour element
$SN_PA_CENT_ORD
[x,6]
x=Number
protection zone
Ordinate of arc center of 7
th
contour element
$SN_PA_CENT_ORD
[x,7]
x=Number
protection zone
Ordinate of arc center of 8
th
contour element
$SN_PA_CENT_ORD
[x,8]
x=Number
protection zone
Ordinate of arc center of 9
th
contour element
$SN_PA_CENT_ORD
[x,9]
x=Number
protection zone
Ordinate of arc center of 10
th
contour element
$SN_PA_CONT_ABS
[x,0]
x=Number
protection zone
Abscissa of end point of 1st contour element
$SN_PA_CONT_ABS
[x,1]
x=Number
protection zone
Abscissa of end point of 2nd contour element