Siemens SINUMERIK 840D sl Series User Manual

List of Action Numbers 08/2005
3-958
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
No. 40
No. 41
No. 42
No. 43
No. 44
No. 45
Explanation Stop processing at block end (NC block: M00/M01).
Not allowed if -
Remedy -
Explanation Stop processing at block end (NC block: M00/M01).
Not allowed if -
Remedy -
Explanation Stop processing at block end (alarm, VDI signal: NC Stop at block limit).
Not allowed if -
Remedy -
Explanation Stop at end of ASUB, if start was performed from "stopped".
Not allowed if -
Remedy -
Explanation Activate program (PI command)
Not allowed if -
Remedy -
Explanation Activate the program which is still external (PI command)
Not allowed if -
Remedy -

Siemens SINUMERIK 840D sl Series Specifications

General

Control Type	CNC
PLC	Integrated SIMATIC S7-300
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Max Axes	31
Programming Languages	DIN/ISO 66025, high-level language (C/C++), Siemens programming languages (e.g., ShopMill, ShopTurn)
Safety Features	Integrated safety functions (Safety Integrated)
Operating System	Windows-based
Drive Interface	SINAMICS S120
Applications	Milling, turning, grinding, laser
Display	TFT color display, various sizes