Siemens SINUMERIK 840D sl Series User Manual

List of Action Numbers 08/2005
3-966
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
No. 85
No. 86
No. 87
No. 88
No. 89
Explanation Activate an "ASUB" user interrupt in a manual mode (VDI signal: ASUB interface, digital-
analog interface).
Not allowed if See 10
Remedy -
Explanation Activate an "ASUB" user interrupt. Is only executed if the channel is in the READY status
(VDI signal: ASUB interface, digital-analog interface).
Not allowed if See 10
Remedy -
Explanation Perform an "ASUB" user interrupt (VDI signal: ASUB interface, digital-analog interface;
for further actions see 10, 11, 12, 85, 86)
Not allowed if -
Remedy -
Explanation Start program processing (VDI signal: Mode group stop).
Not allowed if -
Remedy -
Explanation Activate all machine data with the attribute (NEW_CONF) (NC_block: NEW_CONF).
Not allowed if -
Remedy -

Siemens SINUMERIK 840D sl Series Specifications

General

Control Type	CNC
PLC	Integrated SIMATIC S7-300
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Max Axes	31
Programming Languages	DIN/ISO 66025, high-level language (C/C++), Siemens programming languages (e.g., ShopMill, ShopTurn)
Safety Features	Integrated safety functions (Safety Integrated)
Operating System	Windows-based
Drive Interface	SINAMICS S120
Applications	Milling, turning, grinding, laser
Display	TFT color display, various sizes