Siemens SINUMERIK 840D sl - Page 10

Overview of System Error Alarms 03/2009
Structure of alarm description
1-10
© Siemens AG, 2009. All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
Structure of the alarms for the number range 200 000 - 299 999
Each alarm (fault or warning), consisting of a number, location (optional) and
alarm text, is indicated with further information for the following categories:
• Reaction
• Acknowledgment
• Cause
• Remedy
Note
Instead of <location>, the following is indicated in the alarm display:
• Axis name and drive number or
• Bus and slave number of the PROFIBUS DP component affected
For a more detailed explanation of the "Reaction" / "Acknowledgement" category,
please refer to section: "System reactions on SINAMICS alarms".
"Cause":
For the cause of the alarm/warning, the fault / warning value is prepared as far as
possible in text form.
Action list
The actions described in the alarm texts ("Action %---") are explained in detail in
the table in the "Action list" section.