Siemens SINUMERIK 840D sl Diagnostics Guide

08/2005 Preface
v
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Structure of alarm description
Each alarm consists of an alarm number and alarm text. There are four descrip-
tion categories:
• Explanation
• Reaction
• Remedy
• Program continuation
For a more detailed explanation of the "Reaction" category, please refer to
section: "System reactions on alarms"
For a more detailed explanation of the "Program continuation" category, please
refer to the section: "Clear criteria for alarms"
Structure of the alarms for the number range 200 000 - 299 999
Each alarm (fault or warning), consisting of a number, location (optional) and
alarm text, is indicated with further information for the following categories:
• Reaction
• Acknowledgment
• Cause
• Remedy
Note
Instead of <location>, the following is indicated in the alarm display:
• Axis name and drive number or
• Bus and slave number of the PROFIBUS DP component affected
For a more detailed explanation of the "Reaction" / "Acknowledgement" category,
please refer to section: "System reactions on SINAMICS alarms".
"Cause":
For the cause of the alarm/warning, the fault / warning value is prepared as far as
possible in text form.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based