Installing SINUMERIK Integrate
7
7.1 SINUMERIK Integrate with SINUMERIK Operate
7.1.1 Activating SINUMERIK Integrate products
Procedure
1. Start the SINUMERIK Operate operating software on the control.
2. Press the "Setup" and "Mach. data" softkeys.
3. Press the menu forward key and the "Display MD" softkey.
4. Set the machine data
MD9108 $MM_SINUMERIK_INTEGRATE to "1".
5. The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 139
To Next Page
Loading...
