Siemens SINUMERIK ONE MCP 2400.4c Installation Manual

Procedure with HMI-Advanced
To establish a connection from the SINUMERIK controller to the server, perform the following
steps:
1. Install and configure SINUMERIK Integrate.
Additional information is provided in chapter: SINUMERIK Integrate with HMI-Advanced
(Page 152)
2. Restart the SINUMERIK controller.
Connecting applications with the SINUMERIK control system
8.1 Overview
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
176 Installation Manual, 12/2019, A5E44672080B AE

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English