Siemens SINUMERIK ONE MCP 2400.4c - Operator Control and Display Elements; Front Side; Figure 4-1 Position of Operator Controls of the MCP 2400.4 C

Operator control and display elements
4
4.1 Front side
Overview


① Emergency stop button
② Keypad 1 (operating mode block)
③ Powerride 2 (spindle) + keypad 1.2
④ Powerride 1 (feed) + keypad 1.1
⑤ 4x mounting space for 22.5 mm elements with slide-in labels
⑥ Key-operated authorization switch
Figure 4-1 Position of operator controls of the MCP 2400.4c
Labeling of the keys
The keys are designed with replaceable caps for machine-speci󹪝c adaptations. The key caps can
be freely inscribed using a laser. Alternatively, you can use transparent key caps and insert labels.
ONE MCP Part 2: MCP 2400.4c
Equipment Manual, 06/2022, A5E52072312B AA 17