Add access groups
29
Building Technologies 052_SiPass_Entro_6_5_A24205-A335-B318_e_en
Fire Safety & Security Products 10.03.2010
NOTE 1
Group code cannot be entered if PIN without card is allowed (this can be set in
the Installer application).
NOTE 2
Instead of clicking New, click Duplicate. If the information is similar for the next
access group, you need only change a few pieces of information, e.g. name and
group code.
NOTE 3
You can select an access group and right-click to invoke the same commands as
the buttons.
To Next Page
Loading...
