Need help?Do you have a question about the Siemens SiPass Entro and is the answer not in the manual?
General| Type | Access Control System |
|---|---|
| Manufacturer | Siemens |
| Software | SiPass Integrated |
| Max Readers | Up to 512 |
| Power Supply | 24 V DC |
| Communication | RS-485 |
| Card Types Supported | MIFARE, HID iCLASS, DESFire |
| Supported Credentials | Mobile Credentials |
| Integration | BACnet, OPC |
Outlines the SiPass Entro software components, including Installer, Entro, and Door Monitor applications.
Explains the time settings for door relays, including unlock and opening times.
Details various properties for configuring doors, including unlock times, security levels, and advanced settings.
Details general settings for persons, such as setting individual PINs and defining free fields.
Provides step-by-step instructions for adding and configuring individual persons (cardholders).
Explains how to configure the system to use non-Entro cards for access.
Describes how to configure card prefixes for the Bank Lobby Function.
Guides on creating, naming, and saving new event filters.
Provides instructions on how to change the system's crypto key for enhanced security.
Explains how to search for historical events in the system archive.
Details how to operate doors directly from the PC interface.
Introduces the tool for creating and maintaining card and receipt templates.
Provides step-by-step instructions for printing cards and receipts.
Explains the various methods a person can use to enter a building or secured area.
Guides on how to arm and disarm the intrusion alarm system using cards.
Explains how to use the duress code in case of threat during access.
Details how a user can set or change their personal identification number (PIN).
Provides a guide on creating an Excel file for importing person data into the system.
To Next Page
