Configure persons (cardholders)
33
Building Technologies 052_SiPass_Entro_6_5_A24205-A335-B318_e_en
Fire Safety & Security Products 10.03.2010
Deactivate a person (cardholder)
1. Open the Person Properties dialog.
2. Select the General tab.
3. To deactivate a person untick the check box Active.
- or -
Right-clicking a name in the card list.
Make sure there is no checkmark in front of the menu Card active.
You can select one (or more) persons and right-click – and you can choose
among several commands. E g to make the card inactive, show authorized doors,
export information etc
13.3 Register unknown cards via the Door Monitor application
Sometimes there will be "unknown card” displayed in the event log window of the
Door and Event Monitor program. You can easily make a card valid for a new user
by right-clicking on the card number. A new window will be shown where you enter
information.
13.4 Register cards with enrolment reader at PC
If an unknown card is read to the PC (via the USB-RIF/2), a new window will be
shown where you enter information [ 31] .
13.5 Duplicate a card
1. Open the Entro [ 13] application.
2. Choose the Persons tab.
3. Click on the Button Duplicate.
- or-
Choose Duplicate by right-clicking on a card in the card list.
4. If the information is similar, change a few pieces of information, e.g. name and
card number.
13.6 Duplicate to several cards
In a new system the card numbers are often in a series. You can easily configure
these into SiPass Entro by using the extended duplicate function.
1. Open the Entro [ 13] application.
2. Selec
t the Persons tab.
3. Enter the first card [ 31] .
4. Select the ca
rd to duplicate.
5. Click on the arrows to the right of the Duplicate button.
6. Enter the amount of duplicates the field Number of copies.
To Next Page
Loading...
