Need help?Do you have a question about the Siemens SICAM AK 3 and is the answer not in the manual?
General| Storage Temperature Range | -40 °C to +85 °C |
|---|---|
| Relative Humidity | 5 % to 95 % (non-condensing) |
| Protection Class | IP20 |
| Communication Protocols | IEC 61850, IEC 60870-5-101 |
| Cyber Security | Role-Based Access Control (RBAC) |
| Power Supply | 24 V DC / 48 V DC / 230 V AC |
| Mounting | DIN rail |
| Communication Interfaces | Ethernet, RS232, RS485 |
| Redundancy | Supported (CPU, power supply, communication) |
Covers the procedures and locations for installing board racks in cabinets or frames.
Step-by-step instructions for installing and removing modules from the board rack.
Details on CP-2016/CPCX26 and CP-2019/PCCX26 front panels, block diagrams, and pins.
Introduction to the SICAM TOOLBOX II software and its toolsets for system engineering.
Explains physical and logical connection methods between the PC and the SICAM AK 3.
Overview of the engineering procedure and user interface of SICAM TOOLBOX II.
Outlines tasks for telecontrol parameter setting and documentation using OPM II.
Describes creating application programs using function diagrams (FUD) with CAEx plus.
Details system checks performed during startup and error indications.
Describes diagnostic functions for monitoring system states and errors.
Procedures for recognizing hardware errors and replacing modules.
To Next Page