Installation
34 SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
1.2.4.2 Rear Panel Assembly
Note
The wall fastening kit (TC2-702 / 6MF13130CH020AA0) is necessary for rear panel installation of
CM-2846 and CM-2843.
Proceed as follows:
• Mark out the drill holes for the wall bracket on the rear panel of the cabinet according to
the enclosed assembly instruction (C53207-A5703-E421-1A-7431)
• Drill the holes according to the specifications
To Next Page
Loading...
