Siemens SIPROTEC 5 Hardware Description Manual

Battery
Type CR2032
Button cell
Lithium
Voltage 3 V
Capacity 230 mAh
Average service life of the battery, unpowered after removal of protec-
tive film
At least 6 months
Service life of the battery in the activated state with protective film
removed
10 years
Use button cells from manufacturers like Varta, Panasonic, or Duracell.
i
i
NOTE
After the Battery fault indication, you must replace the battery within 2 weeks. If ignored, data loss may
occur.
6.19
Technical Data
6.19 Battery
SIPROTEC 5, Hardware Description, Manual 257
C53000-G5040-C002-F, Edition 06.2019

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC