Unpacking a Device
Devices are tested prior to delivery. Devices are packed on site in a way that meets the requirements of
standard ISO 2248.
How to procede
²
Check the packing for external transport damage. Damaged packing may indicate that the devices inside
have also sustained damage.
²
Unpack devices carefully; do not use force.
²
Visually check the devices to ensure that they are in perfect mechanical condition.
²
Check the enclosed accessories against the delivery note to make sure that everything is complete.
²
Keep the packing in case the devices must be stored or transported elsewhere.
A.1
Commissioning and Maintenance
A.1 Unpacking a Device
62 SIPROTEC, Coupling Units for Generator Protection, Manual
C53000-H5040-C072-1, Edition 09.2018
To Next Page
Loading...
