To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIPROTEC 4 7VE61 and is the answer not in the manual?
General| Product Type | Protection Relay |
|---|---|
| Rated Current | 1 A or 5 A |
| Current Input | 1 A or 5 A |
| Frequency | 50/60 Hz |
| Display | LCD |
| Housing | Metal |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Voltage Transformer Inputs | 4 |
| Communication Protocols | IEC 61850, Modbus, DNP3 |
| Communication Interfaces | Ethernet, RS485 |
| Protection Functions | Overcurrent |
| Mounting Type | Panel Mount |
Covers applications for parallel switching systems and generators, including optional functions and protection capabilities.
Details synchrocheck, switching synchronous/asynchronous systems, connection types, and operating ranges.
Covers undervoltage, overvoltage, frequency, rate-of-frequency-change, vector jump, threshold supervision, and external trip functions.
Explains control commands from various sources, switching authority, interlocking logic, and command logging.
Covers configuration prerequisites, binary inputs/outputs, interface modules, and mounting procedures.
Provides procedures for test mode, system interface checks, binary I/O tests, analog output checks, and user-defined functions.
Provides technical data for operating modes, voltages, ΔU-Measurement, matching, and power conditions.
Lists parameters for rated frequency, trip command duration, change group, fault recording, undervoltage, overvoltage, frequency protection, etc.
