Default Settings and Protocol-dependent Functions
When the device leaves the factory, a large number of LED indicators, binary inputs and outputs as well as
function keys are already preset. They are summarized in the following table.
D.1 LEDs 248
D.2 Binary Input 249
D.3 Binary Output 250
D.4 Function Keys 251
D.5 Default Display 252
D.6 Pre-defined CFC Charts 254
D.7 Protocol-dependent Functions 255
D
SIPROTEC 4, 7VE61 and 7VE63, Manual 247
C53000-G1176-C163-3, Edition 10.2017
To Next Page
Loading...
