Repacking a Device
How to procede
²
If you store devices after incoming inspection, pack them in suitable storage packaging.
²
If devices are to be transported, pack them in transport packing.
²
Put the accessories supplied in the packing with the device.
²
If devices are to be shipped elsewhere, you can reuse their transport packaging. If using other packaging,
ensure that the transport requirements according to ISO 2248 are met. Storage packaging for individual
devices is not adequate for transport purposes.
NOTE
Before energizing with supply voltage, or after storage, the relay shall be situated in the operating area for
at least 2 hours in order to ensure temperature equalization and to avoid humidity influences and conden-
sation.
A.4
Commissioning and Maintenance
A.4 Repacking a Device
SIPROTEC, Coupling Units for Generator Protection, Manual 65
C53000-H5040-C072-1, Edition 09.2018
To Next Page
Loading...
Need help?
General
