Applications
A.1 Liquids applications
Transducers
Compact Operating Instructions, 09/2021, A5E43390688-AC
43
No additional blanking required
No additional blanking required
Nipple welded into blind flange
Nipple welded into blind flange
Standpipe end cut on a 45°
angle typically
Transducer can read level in-
side or below standpipe
Reflection at interference zone
created by opening
No additional blanking required
Near blanking extension of 150 mm
(6") past end of standpipe may be
required
To Next Page
Loading...
