Applications
A.2 Solids applications
Transducers
Compact Operating Instructions, 09/2021, A5E43390688-AC
49
A.2.2 Special
Storage bin with agitator
A - Transducer should be kept away from infeed.
B - Where agitators are in use, use the Agitator Discrimination parameter on
transceivers, where available.
C - Transducer should be aimed away from wall projections.
D - This seal is not supplied by Siemens.
The XPS-15F and XRS-5C transducer comes equipped with a stainless steel coupling suitable
for use in hazardous locations.
Dryer - wood chips
Transducer should be mounted perpendicular to slope of wood chips.
To Next Page
Loading...
