Certificates
B.1 Wiring setups for hazardous area installations
Transducers
52 Compact Operating Instructions, 09/2021, A5E43390688-AC
ST-H
(ATEX/UKEX/INMETRO/CSA)
(FM)
The ATEX and UKEX certificates and CSA connection drawings can be downloaded from the
product page of our website at: https://www.automation.siemens.com/w1/automation-
technologyst- h-transducer-18736.htm
(http://www.siemens.com/processinstrumentation/certificates
).
Go to Support > Approvals/Certificates for the ATEX and UKEX certificates.
Go to Support > Installation Drawings > Level Measurement > Continuous - Ultrasonic
downloading the CSA connection drawing number 1-9470004Z-DX-A.
The IECEx certificate listed on the nameplate can be viewed on the IECEx website.
Go to: http://iecex.iec.ch (http://iecex.iec.ch
) and click Certified Equipment, then search for
the certificate number IECEx SIR 13.0009X.
Refer to Instructions specific to hazardous area installations (Page 53).
To Next Page
Loading...
