Service and maintenance
7.4 Return procedure
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
101
7.4 Return procedure
To return a product to Siemens, see Returns to Siemens (www.siemens.com/returns-to-
siemens).
Contact your Siemens representative to clarify if a product is repairable, and how to return it.
They can also help with quick repair processing, a repair cost estimate, or a repair
report/cause of failure report.
Decontamination
The product may have to be decontaminated before it is returned. Your Siemens contact
person will let you know for which products this is required.
7.5 Disposal
Devices described in this manual should be recycled. They may not be
disposed of in the municipal waste disposal services according to the Di-
rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a local-
ly approved disposal service for eco
-
friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE)
(
https://support.industry.siemens.com/cs/document/109479891/)
Special disposal required
The device includes components that require special disposal.
Dispose of the device properly and environmentally through a local waste disposal
contractor.
To Next Page
Loading...
