Siemens SITRANS LT500 - Page 70

Commissioning
6.5 Local commissioning
SITRANS LT500 with ultrasonic transducer inputs
70 Compact Operating Instructions, 02/2024, A5E52021877-AA
Display name/description
Vessel shape
Other parameter settings required
Sphere vessel
Maximum volume
Custom
Use for custom volume applica-
tion.
Default
Linear vessel
Maximum volume
① Vessel dimension A ② Vessel dimension L
Vessel dimension A
Sets height of vessel bottom when bottom is conical, parabolic, half spherical, or flat sloped.
If horizontal parabolic ends vessel, sets depth of end.
Setting
0 ... 99999
Default
0 m
Vessel dimension L
Sets length of cylindrical section of horizontal parabolic ends vessel.
Setting
0 ... 99999
Default
0 m
Maximum volume
Sets the maximum volume of the vessel.
Enter the vessel volume corresponding to the upper calibration point.
Setting
0 ... 99999 liters
Default
100 liters
Step: Apply?
Apply?
Applies settings as last step in wizard.
Setting
Yes
Wizard completes and settings are applied.
No
Returned to start of wizard.
Default
No