Siemens SL75 - Call Options; Direct Call

27Calling
right page (27) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Call options
The following functions are only
available during a call:
§Options§ Open menu.
Direct call
If this is active, only one number can
be dialled.
Switching on
C
¢T¢Security
¢Direct call
ì Confirm selection.
J
Enter phone code.
When first prompted you define and
enter the phone code (4 - 8 digits).
Please do not forget this code (page 18)!
ì Confirm selection.
H
/
J
Select phone number
from Contacts or enter it
manually.
ì Confirm.
Applying
§Carol§
To dial the phone number
(e.g. "Carol") press and
hold the right soft key.
Switching off
#
Press and hold.
J
Enter phone code.
ì
Confirm entry.
Hold
Hold current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also: press
*
and hold.
Handsfree
Playback through the
loudspeaker.
Conference
(p. 26)
Time/charge
Display talktime that has
elapsed so far and (if set)
cost incurred during the
call.
Send DTMF
Enter tone sequences
(numbers) for remote in-
quiries to an answering
machine.
Main menu
Access to main menu.
Call transfer
=
Connect the original call to
a second call. For you,
both calls are now ended.
Call status
List all held and active calls
(e.g. participants in a
conference).