EasyManuals Logo

Siemens SR23EI28ME Information For Use

Siemens SR23EI28ME
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
en HomeConnect
40
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use HomeConnect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the HomeConnect app.
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tip:Please also follow the instruc-
tions in the HomeConnect app.
Note:Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the HomeConnect app.
→"Safety", Page4
16.1 Setting up the
HomeConnect app
1. Install the HomeConnect app on
your mobile device.
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
16.2 Setting up HomeCon-
nect
Requirements
¡ The HomeConnectapp has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The appliance door is closed.
1. Open the HomeConnect app and
scan the following QR code.
2. Follow the instructions in the
HomeConnect app.
16.3 Remote Start
You can use the HomeConnect app
to start the appliance with your mo-
bile device.
Tip:If you select "rc2" in the Basic
settings →Page39 of this function,
the function is permanently activated
and you can start your appliance with
a mobile device at any time.
Activating Remote Start
When you have selected "rc1" in the
basic settings of this function, activ-
ate the function on your appliance.
Requirements
¡ The appliance is connected to your
WLAN home network.
¡ The appliance is connected to the
HomeConnect app.
¡ "rc1" is selected in the Basic set-
tings →Page39 of this function.
¡ A programme is selected.
Press ⁠.
If you open the appliance door, the
function is automatically deactiv-
ated.
a button lights up.
Tip:To deactivate the function, press
⁠.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.

Table of Contents

Other manuals for Siemens SR23EI28ME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SR23EI28ME and is the answer not in the manual?

Siemens SR23EI28ME Specifications

General IconGeneral
Door colorStainless steel
Cord length1.75 m
Product sizeSlimline (45 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length2.05 m
Appliance placementFreestanding
Current10 A
AC input voltage220-240 V
AC input frequency50\\60 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.5 L
Cycle time210 min
Noise level44 dB
Delay start (max)24 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings10 place settings
Number of washing programs6
Number of temperature settings4
Package weight43200 g
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width450 mm
Height845 mm
Weight41996 g
Depth with door open1155 mm

Related product manuals