EasyManuals Logo

Siemens SR23EI28ME Information For Use

Siemens SR23EI28ME
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Transportation, storage and disposal en
51
18.1 Clean wastewater pump
Large remnants of food or foreign
bodies can block the waste water
pump. As soon as the rinsing water
no longer drains properly, the waste
water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
Remove any foreign bodies care-
fully.
1. Disconnect the appliance from the
power supply.
2. Remove the top and bottom bas-
ket.
3. Remove the filter system.
4. Scoop out any water.
Use a sponge if necessary.
5. Prise off the pump cover using a
spoon and grip it by the
crosspiece.
6. Lift the pump cover inwards at an
angle and remove.
a You can now reach the impeller
with your hand.
7. Remove any remnants of food and
foreign bodies in the area of the
impeller.
8. Insert the pump cover and press
down ⁠.
1
2
a The pump cover clicks into posi-
tion.
9. Install the filter system.
10.Insert the top and bottom basket.
Transportation, storage and disposal
19 Transportation, stor-
age and disposal
Transportation, storage and disposal
19.1 Removing the appliance
1. Disconnect the appliance from the
mains power supply.
2. Turn off the water tap.
3. Detach the drainage connection.
4. Detach the drinking water connec-
tion.
5. Loosen any screws fastening the
appliance to cabinet parts.
6. Remove the base panel if fitted.
7. Pull the appliance out carefully,
along with the hose behind it.

Table of Contents

Other manuals for Siemens SR23EI28ME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SR23EI28ME and is the answer not in the manual?

Siemens SR23EI28ME Specifications

General IconGeneral
Door colorStainless steel
Cord length1.75 m
Product sizeSlimline (45 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length2.05 m
Appliance placementFreestanding
Current10 A
AC input voltage220-240 V
AC input frequency50\\60 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.5 L
Cycle time210 min
Noise level44 dB
Delay start (max)24 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings10 place settings
Number of washing programs6
Number of temperature settings4
Package weight43200 g
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width450 mm
Height845 mm
Weight41996 g
Depth with door open1155 mm

Related product manuals