en Basic settings
34
Basic setting Display text Selection Description
autoOpen Dry o02
1
o00 - o02 Activate or deactivate automatic
opening of the appliance door during
the drying phase.
The following settings are possible:
¡ With the "o00" setting, automatic
door opening is deactivated in all
programmes.
¡ With the setting "o01" automatic
door opening is activated in all
programmes.
¡ With the "o02" setting, automatic
door opening is only activated in
the Eco 50° programme.
→"autoOpen Dry", Page11
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Remote start rc1
1
rc0 - rc2 Activate or deactivate remote start.
The following settings are possible:
¡ With the "rc0" setting, remote
start is permanently deactivated.
¡ With the "rc1" setting, remote
start can be selected via the re-
mote start button.
→"Remote start ", Page36
¡ With the "rc2" setting, remote
start is permanently activated.
Factory setting rE Start with Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Press .
2. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
3. Press repeatedly until
the display shows the required set-
ting.
4. Press repeatedly until the dis-
play shows the right value.
You can change several settings.
5. To save the settings, press
for 3 seconds.