EasyManuals Logo

Siemens SR23EI28ME User Manual

Siemens SR23EI28ME
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
en Troubleshooting
50
Fault Cause troubleshooting
Rust spots on cutlery. Cutlery is not sufficiently
rust-resistant. Knife blades
are often more severely af-
fected.
Use rust-resistant tableware.
Cutlery may also rust if
washed together with rust-
ing items.
Do not wash rusting items.
Salt content in washing wa-
ter is too high.
1. Remove any spilled special salt
from the tub.
2. Screw the cap of the special salt
dispenser on tight.
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
Check that the spray arms are not
blocked and can rotate freely.
Detergent dispenser was
damp when detergent was
added.
Only add detergent to a detergent
dispenser when dry.
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for
rinse aid.
Immediately add rinse aid to the
dispenser.
→"Adding rinse aid", Page25
Rinse aid has been spilled.
Remove the rinse aid with a cloth.
Detergent or appliance care
product used causes excess-
ive foaming.
Change the brand of detergent.
Home Connect problem
Fault Cause troubleshooting
Connection to home net-
work is not established.
WLAN on router is not act-
ive.
Check the wireless network con-
nection of your router.
WLAN display is flashing. Connection to home net-
work is not available.
Activate the wireless network con-
nection on your router.
Home Connect cannot be
implemented correctly.
Home Connect set incor-
rectly.
Please consult the documents sup-
plied for HomeConnect.
Technical fault is present.
Please consult the information
about support in the documents
supplied for HomeConnect.

Table of Contents

Other manuals for Siemens SR23EI28ME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SR23EI28ME and is the answer not in the manual?

Siemens SR23EI28ME Specifications

General IconGeneral
Door colorStainless steel
Cord length1.75 m
Product sizeSlimline (45 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length2.05 m
Appliance placementFreestanding
Current10 A
AC input voltage220-240 V
AC input frequency50\\60 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.5 L
Cycle time210 min
Noise level44 dB
Delay start (max)24 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings10 place settings
Number of washing programs6
Number of temperature settings4
Package weight43200 g
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width450 mm
Height845 mm
Weight41996 g
Depth with door open1155 mm

Related product manuals