Siemens SR23EI28ME User Manual

Troubleshooting en
51
Information on display panel
Fault Cause troubleshooting
Special salt refill indicator
lights up.
Insufficient special salt.
▶
Add Special salt →Page23.
Sensor does not detect spe-
cial salt tablets.
▶
Do not use special salt tablets.
Refill indicator for special
salt does not light up.
Water softening system is
switched off.
▶
Setting the water softening system
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add Rinse aid →Page25.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page26
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
Set the amount of rinse aid to be
dispensed.
Display flashes. Appliance door is not closed
properly.
▶
Close the appliance door.
‒ Arrange the tableware so
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
Malfunctions
Fault Cause troubleshooting
Water is left in the appliance
at the end of the pro-
gramme.
Filter system or area under
the filters is blocked.
1. Clean the Filters →Page39.
2. Clean the Wastewater pump
→Page54.
Programme has not yet
ended.
▶
Wait until the programme ends or
cancel the programme with Reset.
▶
→"Terminate programme",
Page32
Appliance cannot be
switched on or operated.
Software update is taking
place.
▶
Wait until the software update has
finished.
Appliance functions have
failed.
1. Pull out the mains plug or switch off
the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the power
supply.
4. Switch the appliance on.
Appliance does not start. The mains fuse has tripped.
▶
Check the relevant fuse.

Siemens SR23EI28ME Specifications

General

Door color	Stainless steel
Cord length	1.75 m
Product size	Slimline (45 cm)
Inlet hose length	1.65 m
Custom panel-ready	Yes
Outlet hose length	2.05 m
Appliance placement	Freestanding
Current	10 A
AC input voltage	220-240 V
AC input frequency	50\\60 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Cycle time	210 min
Noise level	44 dB
Delay start (max)	24 h
Overflow protection	-
Dishwashing programs	60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings	10 place settings
Number of washing programs	6
Number of temperature settings	4
Package weight	43200 g

Weight and Dimensions

Depth	600 mm
Width	450 mm
Height	845 mm
Weight	41996 g
Depth with door open	1155 mm