EasyManuals Logo

Siemens SR23EI28ME User Manual

Siemens SR23EI28ME
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
en Troubleshooting
52
Fault Cause troubleshooting
Appliance does not start. Mains cable is not inserted. 1. Check whether the socket works.
2. Check whether the mains cable is
properly inserted in the socket and
on the rear of the appliance.
Appliance door is not closed
properly.
Close the appliance door.
Programme starts automat-
ically.
You did not wait until pro-
gramme ended.
→"Terminate programme",
Page32
Appliance stops during the
programme or cuts out.
Appliance door is not closed
properly.
Close the appliance door.
Power and/or water supply
has been interrupted.
1. Check the power supply.
2. Check the water supply.
Top basket is pressing
against inner door and pre-
venting appliance door from
being closed securely.
Check whether the rear panel of the
appliance is being pressed in by a
socket or hose holder that has not
been removed.
Arrange the tableware so that no
parts project beyond the basket
and prevent the appliance door
from closing properly.
Mechanical damage
Fault Cause troubleshooting
Appliance door cannot be
closed.
Door lock has been activ-
ated.
Close the appliance door with
greater force.
Door cannot be closed due
to installation method.
Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
Lid on the detergent dis-
penser cannot be closed.
Detergent dispenser or lid
are blocked by sticky deter-
gent residue.
Remove detergent residue.

Table of Contents

Other manuals for Siemens SR23EI28ME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SR23EI28ME and is the answer not in the manual?

Siemens SR23EI28ME Specifications

General IconGeneral
Door colorStainless steel
Cord length1.75 m
Product sizeSlimline (45 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length2.05 m
Appliance placementFreestanding
Current10 A
AC input voltage220-240 V
AC input frequency50\\60 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.5 L
Cycle time210 min
Noise level44 dB
Delay start (max)24 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings10 place settings
Number of washing programs6
Number of temperature settings4
Package weight43200 g
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width450 mm
Height845 mm
Weight41996 g
Depth with door open1155 mm

Related product manuals