EasyManuals Logo

Siemens SR23EI28ME User Manual

Siemens SR23EI28ME
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Troubleshooting en
45
Fault Cause troubleshooting
Tableware is not dry. 2. Use a different combined detergent
with a better drying performance.
Extra Dry not activated to im-
prove drying performance.
Activate Extra Dry.
Tableware removed too
early or drying process not
yet ended.
1. Wait until the programme ends.
2. Only remove tableware 30minutes
after the programme has ended.
Rinse aid used has a limited
drying performance.
Use a name-brand rinse aid.
Eco products may have limited ef-
fectiveness.
Appliance door does not
open automatically at the
end of the programme
Adjust the appliance door as de-
scribed in the installation instruc-
tions.
The door gap must be at least
70mm - 100mm.
Plastic tableware is not dry. Not a fault. As plastic does
not store heat so well, it also
does not dry as well.
No remedial action possible.
Cutlery is not dry. Cutlery not arranged prop-
erly in the cutlery basket or
cutlery drawer.
Droplets can form on the cutlery con-
tact points.
1. Arrange cutlery individually where
possible. →Page29
2. Avoid points of contact.
Appliance interior still wet
after wash cycle.
Not a fault. The condensa-
tion drying principle causes
water droplets in the tub –
they are indeed desirable
here. The moisture in the air
condenses on the inside
walls, runs off and is
pumped out.
No action required.
Remnants of food on table-
ware.
Tableware is placed too
close together or basket is
overfilled.
1. Arrange tableware with sufficient
space in between.
The spray jets must reach the sur-
faces of the tableware.
2. Avoid points of contact.
Spray arm rotation is
blocked.
Arrange tableware so that it does
not obstruct spray arm rotation.
Spray arm nozzles are
blocked.
Clean the Spray arms →Page40.

Table of Contents

Other manuals for Siemens SR23EI28ME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SR23EI28ME and is the answer not in the manual?

Siemens SR23EI28ME Specifications

General IconGeneral
Door colorStainless steel
Cord length1.75 m
Product sizeSlimline (45 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length2.05 m
Appliance placementFreestanding
Current10 A
AC input voltage220-240 V
AC input frequency50\\60 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.5 L
Cycle time210 min
Noise level44 dB
Delay start (max)24 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Eco 50°C, Intensive 70°C, Standard 60°C
Number of place settings10 place settings
Number of washing programs6
Number of temperature settings4
Package weight43200 g
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width450 mm
Height845 mm
Weight41996 g
Depth with door open1155 mm

Related product manuals