Siemens ST60 - Time;Charge; Display Call Details; Charge Settings

Time/Charge
29
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_timecharge.fm
Time/Charge CMCall registerMTime/Charge
You can display charge details and
the duration of different types of
calls while you speak, as well as set-
ting a unit limit for outgoing calls.
Display
I
Select type of call:
Last call
All calls
Remain. units
Incoming calls
Outgoing calls
§Select§ Display the data.
Once displayed you can:
§Reset§ Reset display.
§OK§ End display.
Charge settings
CMCall registerMCharge settings
Currency
(PIN2 required)
Enter the currency in which the
charge details are to be shown.
Cost/unit
(PIN2 required)
Enter the charges per unit/period.
Credit limit
(PIN2 required)
Special SIM cards allow you or the
service provider to define a credit or
a period after which the phone is
barred for outgoing calls.
§Edit§ Press, enter PIN 2.
Credit limit
Switch on.
J
Enter number of units.
§OK§ Confirm.
Then confirm the credit or reset the
counter. The status display for pre-
paid cards may vary, depending on
the service provider.
Auto display
Call duration and call charges are
automatically displayed for each call.
L
L
L