Release 1.1
Technical Documentation
11/2005
TD_Repair_L1-L3_SXG75_R1.1.pdf Page 28 of 61
8 GRT Software: Functionality Configuration
Note: Not implemented in GRT Version 3.x. For Software Update please use the tool
3GSWUP_FU. Manual and Software are available in the Technical Support section of
the C-market.
Sep 1:
Select „Settings >> SWUP / JPICS”
Step 2:
Proceed as follows:
¾ Select all required Variants you need to repair (click onto the “+” in
front of the product name.
¾ Check Com-Port setting. If necessary change it
¾ Check speed setting. Select always the lowest speed if your PC
does not have a fast serial card
¾ Enter the value for “JPICS Server Timeout”. Be careful, this value
defines how long GRT tries to reach the server until you get an
error message. Do not select a very long time
To Next Page
Loading...
