Siemens SXG 75 - SXG75 Level 3 Repair Equipment and Software

Release 1.0
Technical Documentation 01/2006
TD_Repair_L3_SXG75_R1.0.pdf Page 7 of 73
3 Required equipment for level 3
- GSM-Tester (CMU200 or 4400S incl. options)
- PC, incl. monitor, keyboard and mouse
- USB boot cable (F30032-P465-A1)
- Troubleshooting frame SXG75
- Power supply
- Spectrum analyser
- Active RF-Probe incl. power supply
- Oscilloscope incl. probe
- RF-Connector (N<>SMA(f))
- Power supply cables
- Dongle (F30032-P28-A1). If USB-Dongle is used, a special driver for NT is required
- Soldering and BGA soldering equipment for lead free soldering.
Reference: Equipment recommendation
(downloadable from the technical support page)
4 Required software for level 3
- Windows XP
- XFocus V2.06
- GRT V3.07
- Internet unblocking solution (JPICS)
Company Confidential
2006©BenQ