10
11
3/3 P
Program button
The hearing instrument is auto-
matically switched on when the
battery is inserted and the battery
compartment closed. The instru-
ment then diverts to program“1“.
By pressing the program button
approx. 3 seconds the hearing
instrument is switched off.
If the hearing instrument has already been operated and
then switched off as described above, to switch it on again
simply press the program button approx. 3 seconds. The
instrument diverts again to program“1“.
The battery should be removed if the hearing instrument is
not in use over a longer period.
Switching ON/OFF
Program
button
The plus (+) side of the battery is always the
smooth side. You can recognize the minus (–) side
by the coloured ring.
You should always keep spare batteries
at hand.
If you feel you cannot change the battery yourself,
ask someone to help you: a family member, friend
or your hearing instrument specialist.
Useful tips:
Please do not throw used batteries into household
refuse. Return them to your hearing instrument
specialist for environmentally correct disposal.
Caution!
Please keep batteries out of the reach of children. They
are damaging to health when swallowed.
How to select the programs
The TRIANO 3/3P instruments have 4 hearing programs
which are selected with a program button. Each time the
button is pressed the instrument diverts to the next program
which is confirmed with a beep tone. The number of beep
tones is identical with the selected program. That means
when program “3“ is selected 3 beep tones are heard.
The standard seizure of the programs is as follows:
Program “1“ – for the most frequently hearing
situations
Program “2“ – is the automatic microphone mode
Program “3“ – is telecoil mode
Program “4“ – normally not activated but can be pro-
grammed if requested
Battery compartment
There are two ways to switch
the TRIANO 3/3P ON/OFF.
The first way is by using the
battery compartment. When it
is completely closed, the
TRIANO 3/3P is “ON“ (see fig.1).
Opening the battery compart-
ment to the first stop (see fig. 2)
means the instrument is turned
“OFF“.
The second way to switch the
instrument is by using the
program button. See chapter
“Program button“.
fig. 1
fig. 2
To Next Page
Loading...
Need help?
General
