EasyManua.ls Logo

Siemens TUTORbit POL945 - Module Rotation and Solar Control Parameters; Module Rotation Modes and DHW Rotation; Anti-Legionella and Solar System Settings

Siemens TUTORbit POL945
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
TUTORBIT
COSMOGAS
Continued on the next page
6 - USE
Monday Start Stop
06:00 8:00
12:00 14:00
18:00 00:00
Setting the 3 operating time slots on Monday, Tuesday, Wednesay,Thursday and Friday.
Installer
Off
Reduced
Comfort
Precomfort
Cooling Timer program
Installer
Saturday Start Stop
06:00 8:00
12:00 14:00
18:00 22:00
Setting the 3 operating time slots on Saturday and Monday
Installer
Zone2 Heating circuit 2 (submenu equal to Zone 1)
User
Zone3 Heating circuit 2 (submenu equal to Zone 1)
User
Zone4 Heating circuit 2 (submenu equal to Zone 1)
User
Zone5 Heating circuit 2 (submenu equal to Zone 1)
User
Anti-legionella Anti-legionella setting parameters for the DHW tank
Installer
Frequence Cycle frequency
Installer 1...30 7 days
Light-on hour Cycle start time
Installer 0...23 6 h
Setpoint Hot water tank lling setpoint during the anti-legionella cycle
Installer 50...70 65 °C
Max light-on delay Maximum time for reaching the anti-legionella setpoint
Installer 1...360 30 min
Hold on timer Minimum time for maintaining the anti-legionella temperature
Installer 1...360 15 min
Output rotation Rotation of the heat generators
Installer
Heating Rotation of the heat generators assigned to the “Heating” service
Installer
Mode Type of rotation: Fixed = rotation on a time basis;
Absent = no rotation;
Timed = Rotation based on the ageing time;
Installer
Fixed;
Absent;
Timed;
Fixed
Fix Rotation “Fix rotation” parameters
Installer
Interval Time for the next rotation
Installer 0...15 6 days
Base time rotation “Base time rotation” parameters
Installer
Max ancient diff Maximum ageing time of a heat generator after which rotation occurs.
Installer 0...10 6 days
DHW Rotation of the heat generators assigned to the “DHW” service
Installer
Mode Type of rotation: Fixed = rotation on a time basis;
Absent = no rotation;
Timed = Rotation based on the ageing time;
Installer
Fixed;
Absent;
Timed;
Fixed
Fix Rotation “Fix rotation” parameters
Installer
Interval Time for the next rotation
Installer 0...15 6 days
Base time rotation “Base time rotation” parameters
Installer
Max ancient diff Maximum ageing time of a heat generator after which rotation occurs.
Installer 0...10 6 days
Outdoor temperature Outdoor sensor parameters
Installer
Building type Delay generated by the building’s insulation before an external temperature variation affects the room
temperature
Installer 0...20 0 hs
Actual Actual outdoor temperature
Installer Value Value

Table of Contents

Related product manuals