Siemens ULTRAMAT 6F - Hazardous Area Safety

Siemens AG
SIL Safety Manual ULTRAMAT 6 Gas analyzers 4 of 19
A5E00729183-02
1
Introduction
1.1 General
There are two types of analyzers: Stand alone ULTRAMAT 6 analyzers and
units with two analyzers: OXYMAT 6 and ULTRAMAT 6. The synonym
ULTRAMAT 6 is used for both types of devices.
The following table lists all available types:
Analyzer name Design Standard
analyzer
Special
analyzer
ULTRAMAT 6F 1 channel (1 x IR) 7MB2111 7MB2117
ULTRAMAT 6F 2 channels (2 x IR) 7MB2112 7MB2118
ULTRAMAT 6E 1 channel (1 x IR) 7MB2121 7MB2127
ULTRAMAT 6E 2 channels (2 x IR) 7MB2123 7MB2128
ULTRAMAT 6E 1 channel (2 x IR) or
2 channels (3 x IR)
7MB2124 7MB2126
ULTRAMAT/
OXYMAT 6E
2 channels (1 O2, 1 IR) 7MB2023 7MB2028
ULTRAMAT/
OXYMAT 6E
2 channels (1 O2, 1 IR) 7MB2024 7MB2026
1.2 Purpose of this document
This document contains information and safety instructions that you will
require when using the ULTRAMAT 6 in safety-instrumented systems.
It is aimed at system planners, constructors, service and maintenance
engineers and personnel who will commission the device.
1.3 Required documentation
This document deals with the ULTRAMAT 6 gas analyzer exclusively as part of
a safety function. This document only applies in conjunction with the
following documentation:
No. Name Order No.
/1/ INSTRUCTION MANUAL
ULTRAMAT 6E/F, OXYMAT 6E/F
C79000-G5200-C143 (German)
C79000-G5276-C143 (English)
C79000-G5278-C143 (Spain)
C79000-G5272-C143 (Italian)
C79000-G5277-C143 (French)