Uroskop ACCESS SPL5-330.840.01 Page 8 of 12 Siemens AG
Endoscopy Option Rev. 01 03.03 CS SD 24 Medical Solutions
5 - 8 Error Correction
Example of the test configuration with chrome-plated pliers, contrast too high.
Arrow 1:
When changing from the correct contrast setting to a high contrast setting, there is little
change in the color of the reflective areas of the pliers.The reflective areas of the pliers
appear bright and glaring, and do not have a white border. Image noise cannot be
detected in the reflective areas.
Arrow 2:
The base structures disappear due to the saturation effect (overmodulation) at the analog
monitor input. As a result, the contrast needs to be reduced.
Fig. 6
To Next Page
Loading...
