Siemens Washing machine - And; Changing the Programme

15
Topping up laundry
+
changing programmes

Before switching on the machine, check that the mains cable is connected and the tap is open.
Ensure that all lids are properly closed.
For purposes of safety, it is suggested that the mains cable be unplugged and the tap closed
when the programme has ended.
After a power cut, the programme resumes from the point at which it was broken off.
Changing the programme
If you have chosen the wrong programme:
• Turn programme selector to
”Off”.
• Set programme selector to the desired
programme.
Display light lights up.
• Press
”Start” if applicable.

The spin speed may be changed at
any time during the programme.

As long as they are still active, all
options may be terminated at any
time during the course of the
programme.
Terminating the programme
If you would like to terminate a programme
before it is completed:
• Set programme selector to
”Off”.
• Set programme selector to ”Spin”.
Display light lights up.
Select desired spin speed for ”Spin” (but not
Rinse Stop).
• Press
”Start” button.
AA