Siemens Washing machine - Troubleshooting Minor Faults; Identifying and Resolving Common Malfunctions

Troubleshooting minor faults
The washing machine indicates malfunctions via blinking indicator lights.
23
Blinking
indicator lights
Cause / Remedial action
Drain hose condition : The connection must not be blocked (see
chapter ”APPLIANCE CONNECTIONS: Water drainage”).
Drum blocked. Check if a small laundry item (e.g. handkerchief,
sock...) has got between the detergent dispenser and drum. For
access to the bottom of the dispenser, refer to the chapter
”CLEANING THE FILTER”.
lid improperly closed. Check if the lid is closed and start the
programme using the ”Start/Pause” button.
No water flows in. Open tap and press the ”Start/Pause” again. This
malfunction may be caused by an improper water supply hose
connection (see chapter "APPLIANCE CONNECTIONS: Water-inlet
hose“).
Pump filter blocked. Clean the pump filter (see chapter ”CLEANING
THE FILTER”) and restart the program with the ”Start/Pause” button.
Check drain hose : The connection must not be blocked (see
chapter ”APPLIANCE CONNECTIONS: Water drainage”).