7
Removing the transportation protection
devices
5
Remove the
protection devices
(Figure 3)
.
To do this:
- Remove
protective strip
- With a quarter turn,
remove protection
device
6
Remove hose retainers
➀
and cover
the holes with the caps provided
➁
(found in the accessories package)
(Figure 4)
.
We suggest saving all transportation
protection devices because this must
be reinstalled in case of possible later
transport.
Before leaving the factory, this
appliance was carefully checked
.
There may be some water in the tub
or in the detergent chambers
because of testing that took place.
(depending upon model)
If the machine is fitted with hidden castors,
it can easily be moved.
To set the machine on the castors, turn the
lever below the appliance to the left until it
encounters a stop
(Figure 5
).
The appliance must always be stood
firmly on its feet before it is used for
washing (lever to the right).
Figure 5
Moving the appliance
To Next Page
Loading...
